Products

Moisture-resistant MDF is manufactured to be used in environments with risks of moisture or humidity, avoiding the issues that would plague traditional MDF. This is achieved by using a moisture-repellant resin during manufacture, ensuring that an MDF board is not prone to absorbing moisture to the same extent.

Fire Resistant melamine MDF board is made from FR (Fire resistant ) MDF (Medium Density Fibreboard) base board and melamine paper,Formed by high temperature hot pressing.Its biggest advantages are fire resitstant , environmental protection, wear resistance, high temperature resistance, corrosion resistance, waterproof, simple and convenient, variety of patterns and colors ,etc. It is the first choice for customized furniture and indoor decoration . FR Parameters are as follows : FIGRA0.4MJ(W/S)≤250 ,THR600S(MJ)≤15, SMOGRA(㎡/s²)≤3.

3D Decorative Wall Panel is a new type of fashionable art interior decoration board. It mainly used in Hotels, Clubs,Home Decoration, Dance Halls, Resorts, Shopping Malls, Luxury Homes, Villas and other decoration projects. Especially suitable for the design of doors, entrances, background walls, TV walls, Pillars, bar, ceiling, exhibition frame. Can replace natural bark, stick,face plate, etc.

JIKEWOOD Fibreboards are made from poplar and can be produced at densities ranging from 630kgs/m³ to 1150kgs/m³. It’s a kind of fiberboard. We can directly export the plain board, also can be made into fire-proof, moisture-proof, water-proof and so on.MDF ,HDF is mainly used infurniture, cabinets and so on.

Scaffold-grade lumber is meant to withstand forces not imposed on ordinary, construction-grade wood (which is only two-thirds the capacity of scaffold-grade). Using construction-grade lumber on a scaffold platform not only violates OSHA standards, but is also an unsafe practice and an invitation to a deadly incident.

Laminated Veneer Lumber (LVL) is one of the most common scaffold plank styles used on a jobsite requiring stagging. These laminated planks meet all conformance standards for OSHA and are tested rigorously by their manufacturers

Laminated veneer lumber (LVL) is an engineered wood product that uses multiple layers of thin wood assembled with adhesives. It is typically used for headers, frame, studs, beams, rimboard, and edge-forming material. JIKEWOOD LVL offers several advantages over typical milled lumber: Made in a factory under controlled specifications, it is stronger, straighter, and more uniform. Due to its composite nature, it is much less likely than conventional lumber to warp, twist, bow, or shrink. LVL is a type of structural composite lumber, comparable to Glued laminated timber but with a higher allowable stress.

I-Joist  is a New Wooden Engineering Structural Component . It refers to the solid wood or LVL used as the upper and lower flange, and the plywood structural plate bonding, specifications and performance of stable bearing structural members.The I joist is made up of two main parts: Flange and web these two parts: the first part is the flange flange of the upper and lower Flange, which is made up of solid wood or LVL.The second part is the intermediate Web called the Web(net), the usual material is OSB board.The Flange gets its name from web and flange, which are connected together with high-quality adhesives to form an ‘I’ shape.The web of I joist can be cut open to accommodate wires and pipes. A common I-beam web will have 40mm pre-punched holes. The specific position and maximum size of the holes can be calculated according to the drawings and corresponding tables, as shown in Figure 2, and the strength of the I-beam will not be affected by the pipe cutting holes.

Low cost, high stiffness, light weight;

Exchangeable, achieve E0 environmental protection standard;

High degree of standardization system production components, reusable good.

H20 beam is an important part of the international common building formwork system. It is of light weight, high strength, good straightness, not easy to deformation, water and acid and alkali resistance on the surface. It can be used year-round and has low cost amortization costs. Can be used with domestic and foreign professional template system products.JIKEWOOD H20 Beam mainly use Pine wood .

Hollow Plastic Formwork (Shuttering) is though to conventional PP materials were modified by polymer additives, which improves the hardness of the template while ensuring its toughness. According to our experience and test report, our hollow plastic shuttering can be recycled up-to 50 times, the strength can reach to 3200MPa, the deformation rate is within 2mm and the diagonal line is within 0.5mm, which better meets the construction needs.It is a new type recycled construction build material.

Film faced plywood is the high-quality wood-based plywood covered with a layer of film-covered paper, and the film-covered paper and the wood-based panel are thermally pressed to form a building-covered template;

The surface of the film-covered board is smooth, bright, waterproof, fireproof, It has excellent durability (weather resistance, corrosion resistance, chemical resistance) and anti-fouling ability. The use of film-coated board construction makes the cement mold surface smoother, which can better remove the mold and avoid secondary ash. Improve work efficiency and save manpower and materials.

Ordinary particleboard is also called PARTICLE BOARD, CHIPBOARD, BAGASSE BOARD, scrap made of wood or other lignocellulosic materials, artificial board that is glued under the action of heat and pressure after applying adhesive, also known as particle board. Mainly used in furniture manufacturing and construction industry and train, automobile carriage manufacturing. Particleboard has a relatively uniform structure and good processing performance, and is a better raw material for making furniture of different specifications and styles. It can be used directly, and the sound absorption and sound insulation performance are also very good

High moisture resistant particle board contains a moisture resistant resin that allows it to be used in areas of high humidity such as kitchens and bathrooms. None of the other porpoerties are impacted by the added resin.

Tubular, or hollow core particle board is made using the extrusion press system resulting in an ideal combination of light weight and stability. Working Properties.

Particle board, also known as particle board and chipboard, is an engineered wood product manufactured from wood chips, sawmill shavings, or even sawdust, and a synthetic resin or other suitable binder, which is pressed and extruded.

Green PP Film-faced plywood is our most popular product among product selections for over 20 reuse times.We accumulated a strong customer base for this product along past 8 years. 

PP formwork plywood use PP antiwearing layer to replace traditional film to increase reuse times and uses special combining method to make sure pp layer and plywood core are firmly bonded.

PP Formwork plywood is entry level product for product over 20 reuse times and its price is very good too.If you happen to have a project which needs 20-25 repeated usage of one panel, PP film faced plywood is your best choice.